Thread: 2400XP Results
View Single Post
  #12 (permalink)  
Old 13th October, 2002, 04:05 AM
whatever's Avatar
whatever whatever is offline
Member
 
Join Date: January 2002
Location: moon
Posts: 1,132

agreed with Mr. Evans.

nherc, 2.00V with that chip running at such of mhz will de-color your SLK800 in a week! you could be cooking with it. First can u tell me what temp is it at that Vcore and mhz in Celsius? Plus if you want full load, run Prime95. That will get you the super-high temp. By then it could cook your SLK-800.. especially with that 40cfm 80mm fan.. not enough air coolin' me thinkx...

Put a Tornado 80x80x38 84.1CFM, model: TD8038H from Vantec. That should be the best cooling in air.. that is if you want to go air. That should cool it good at 2.0V@ 2.3- 2.4Ghz.
Sounds like your chip@ 2.0V got too hot during the 3dmark'ing. Or, you might need 2.05V. In either cases, you need to cool more.

http://www.hardocp.com/images/articl...GfgF_2_2_l.jpg
__________________
sig
HTPC
Conroe E6600 + stock cooler @ 3.2ghz
ATi X1950XTX 512 CrossFire
Triple WD Raptor 10k HDDs@ raid 0
50" Panasonic Plasma TH50PHD7UY
50" Panasonic Plasma TH50PH9UK
BetterCable SilverSerpent SVGA & DVI-D
Sony BWU-100A Blu-Ray PC Drive

p4 - superPi - 31 sec.
pM - superPi - 28 sec.
conroe - superPi - 14 sec.

Last edited by whatever; 13th October, 2002 at 04:08 AM.
Reply With Quote