View Single Post
  #7 (permalink)  
Old 20th November, 2002, 08:10 PM
Daniel ~'s Avatar
Daniel ~ Daniel ~ is offline
Chief BBS Administrator
Join Date: September 2001
Location: Seattle Wa.
Posts: 45,606

First set you Dimm Settings in "Advance Chip set options> Dram Options/Drive control" to "Turbo and manual" Then set your ram to 133MHZ.

Then go into Frequency/ Drive control and set your clock Multiplier to X12, Set "Watch dog" to on.

Set your V-core chip voltage to 1.90 and set your ram to 2.90. Save changes.

Try and boot.

Come back here for further tweaking. BTW the the 133 setting in DRAM Options will reset it self to 166 when you boot up this is as it should be.
Best of luck!
"Though all men live in ignorance before mystery,
they need not live in darkness...
Justice is foundation and Mercy ETERNAL

"All that we do is touched by Ocean
Yet we remain on the shore of what we know."
Richard Wilbur

Subscribers! Ask Pitch about a Custom Sig Graphic

Reply With Quote