View Single Post
  #7 (permalink)  
Old 9th February, 2003, 03:51 AM
Mariah Mariah is offline
Member
 
Join Date: January 2003
Posts: 45

I left it overnight (over 12 hours) with the Battery out, and All Power Cords Unplugged.

Turned her on this mourning, still C1 and the same beeps as before.

Then I took out my single stick of XMS3200, and put it back into the same DIMM1, still C1 and the same beeps as before.

Then I changed it from DIMM1 to DIMM3, still C1 and the same beeps as before.

I also took out the JCLK Jumper, in the hope it would boot it at 100fsb, still C1 and the same beeps as before.

Alot of people seem to think its RAM, how can the BIOS kill the RAM, I didn't touch it at all between overclocking (case was closed) to short it.
__________________
Reply With Quote