View Single Post
  #5 (permalink)  
Old 21st February, 2003, 10:19 AM
Live Live is offline
Member
 
Join Date: October 2002
Location: Sweden
Posts: 26

I run a Tbred 2100+ AIUHB 301 on a 8K5A3+. Works without a problem. So I would say that Tbreds works fine on this board.

So if my case is any guide it seems as the radeon is the problem. First are your temps alright? Have you gone trough the hardware to see if anything got wrong when you installed your new hardware?

You could try setting everything to the most conservative settings in bios and see if it works. Turn of any shadowing and lower all AGP settings. Install OS with APIC turned of in Bios.
__________________
Setup:Win XP PRO SP1 : Antec 1080 AMG : 430w Antec Truepower : Epox 8k5a3+ kt333 : AMD 2100XP @ 2,35GHz SLK 800 Enermax 80 @ 3400 RPM AS3 : 2*Corsair pc 3200 C2 1T 256Mb : WD80JB : GF3 200 ti @ 220/500 : LiteOn CDRW 241248 :
Reply With Quote