View Single Post
  #5 (permalink)  
Old 4th April, 2003, 05:25 PM
golfer49 golfer49 is offline
Member
 
Join Date: January 2003
Location: Peru, Illinois
Posts: 549
Send a message via ICQ to golfer49

If you have the WD hard drive jumpered correctly, on the end of an 80 pin cable, as master on IDE 1, it will work correctly. This is a problem with the drive, not the motherboards, and I have had it with the 8RDA, 8RDA+, and now the 8RGA+, but when jumpered properly, they work.
__________________
Golf is a good walk spoiled! ( Mark Twain )

Abit NF7-S rev 2.0 Barton 2500 AQZFA0340SPMW 11 x 214
w/SLK900A & 92 mm fan (38 deg C)
2 x WD400JD---Gainward Ti4200 8 X AGP
Twinmos PC3200 w/ Winbond chips 2 X 256
600 watt dual fan psu

Abit NF7-S rev 2.0 XP1700DLT3C 10 x 225
SK7 with 80mm smartfan ( 37 deg C )
Gainward FX5200 128 Mb DDR
2 x 40 Gb Maxtor ATA 133 drives
Buffalo PC3200 2 x 256 CH5 chips
650 watt dual fan power supply

WinXP Pro, SP1, nVidia 3.13 on both
Reply With Quote