what i meant is if you leave your Vcore
set up @ 1.872 as per your first post when running at 11x200fsb does problem return? or do you have to have 1.872Vcore And 2.4ghz?
sounds like you reset the cmos
with a jumper in order to get going again. holding insert when powering up forces your fsb to the fsb jumper's default setting allowing a failed overclock to be booted without opening the case. pressing delete thereafter will get you into the bios where you will be able to reverse any recent changes.
bench: a64 abit kv8-max3, no cpu, bh-5
server: epox-nf2, 1700+, ddr266, openbsd
Last edited by flytek; 10th May, 2003 at 04:27 PM.