Thread: Unlocking duron
View Single Post
  #3 (permalink)  
Old 12th July, 2003, 05:44 AM
whatever's Avatar
whatever whatever is offline
Join Date: January 2002
Location: moon
Posts: 1,132

Holst, swap your L10.. connect the bridge that was already cut by factory, and cut the bridge that was already connected.

L10 swap method will enable your Duron1.3 to enter the low-half range of multipliers (5x~ 12.5x)..

and close all L1 bridges ofcourse.
Conroe E6600 + stock cooler @ 3.2ghz
ATi X1950XTX 512 CrossFire
Triple WD Raptor 10k HDDs@ raid 0
50" Panasonic Plasma TH50PHD7UY
50" Panasonic Plasma TH50PH9UK
BetterCable SilverSerpent SVGA & DVI-D
Sony BWU-100A Blu-Ray PC Drive

p4 - superPi - 31 sec.
pM - superPi - 28 sec.
conroe - superPi - 14 sec.

Last edited by whatever; 12th July, 2003 at 05:51 AM.
Reply With Quote