View Single Post
  #7 (permalink)  
Old 26th August, 2003, 05:04 PM
speeduk speeduk is offline
Join Date: August 2003
Posts: 19

Originally Posted by SteveI
Do you have MBM or other voltage monitoring software? If yes, check the 12v voltage at idle and under load. If the 12v line is dipping under 11.4v, it is a potential cause for lockup.
My 12v rail always stays about 11.89-11.98 or something like that. But its just started making clunking noises when I started the pc up, and the intake at the bottom of the psu (its a dual fan psu) stopped spinning!
Reply With Quote