Quote:
|
Originally Posted by Daniel ~ Hello Hasw! Good to see your still finding ways to improve your creation! |
And it's not yet finished ...
The main-target at version 1.0 is
a tool that is able to set FSB,
VCore,
VDimm,
VAgp and on the new
8RDA+ Vdd.And, of course, can change this parameters depending on
CPU load.
Quote:
|
Originally Posted by Daniel ~ Would you please write a bit about it's capabilities and use for our new members...and... (cough) our front page? |
Ok, here is a summary:
8rdavcore 0.6b:
----------------
- Sets the
VCore,
VDimm and
VAgp voltages at
runtime on Epox 8RDA(+) boards
- Displays real sensor values:
CPU-temp,
VCore,
VDimm,
VAgp
- Full GUI
- Installs automatically the GiveIO-driver.
Purpose:
- Find the right voltages on overclocked systems
without rebooting.
Example: Run prime95 or some other stress-test
program and decrease
VCore/
Vdimm until you
get an error. Now increase the voltage one step
and try again. Repeat this until you get no
more error. Now you have the lowest possible
voltage ;-)