@Kamerat: Don't set it manually to 2.9V, leave
VDimm,
VAgp and only use
VCore. This version of 8rdavcore doesn't know something
about Vdd and because the boards with Vdd-support have a different
mechanism. Only
VCore will work.
The next version will recognize the board-type.
@mal0: Yes, I know this problem. I think the lowest value in Bios is 1.4V
because the CPUs didn't startup correctly with lower voltages...
I've heard from someone that his Abit board allows voltages under 1.4V,
but his
CPU only starts with 1.4V.
Normally the Bios sets the Voltage to 1.4V at POST -> No problem.
But if you use hibernate (ACPI suspend-to-disk, supend-to-
ram or the Windows NO-ACPI suspend-to-disk?), it seems that the 1.4V are not set...-> error.
Set your voltage to 1.4V before hibernate. The 0.6.1b GUI has no
command-line options. Use
http://www.hasw.net/8rdavcore/8rdavcore-0.5.5-win.zip
it has the same functions and is a command-line program only.