Thread: How to?
View Single Post
  #3 (permalink)  
Old 27th October, 2003, 07:33 AM
zvezdjuck zvezdjuck is offline
Member
 
Join Date: October 2003
Location: Russia
Posts: 5

Well, EP-3PTA allows user to raise FSB with the step of 1MHz. Raising FSB higher than 110MHz causes PCI bus errors, and with the FSB of 115MHz I have the limit. When comp boots up, it says that it's Celeron 1.49GHz and continues loading OS. There WCPUID says that actual speed is ~1502MHz. Raising FSB to 116MHz causes hang up before memory test though CPU boots and says that it's 1.50GHz. Maybe, it's due to CPU itself, but I'm sure it's due to motherboard limits.
Personally, I would like to make it run at 133MHz FSB, because PCI would work at 33MHz and produce no errors, while performance should be pretty competitive.
__________________
Reply With Quote