Quote:
|
Originally Posted by j13 Yes, I was using ver.7 & yes my question was if I'm running Ram and FSB asynchron it will only change the CPU's FSB or both same as NVdia's sys util? |
Hm. As I understand async FSB/memory speed it works by either setting the memory locked to standard speed (SPD) or by over/underclocking it based on a divider of the current FSB.
If this is correct then the answer to your question is "it depends". If you have locked the memory speed to standard speed in the BIOS, it will always run at that speed. If you use a divider (precentage setting) it will be adjusted too, according to whatever you set the FSB to.
But next question is .. why do you run it async? It will be very OT here so I ask you not to answer it hehe.