View Single Post
  #6 (permalink)  
Old 1st January, 2004, 09:45 PM
newhit newhit is offline
Join Date: February 2002
Location: uk
Posts: 51

Originally Posted by Drazen xxx
I can't get my Barton 2500+ to run stable on 11*200MHz.
I also have 2*256MB DDR400 GEIL.
Do i have to flash my bios or just get the NB cooling?
Does your mbd have the latest "C" stepping NB? If not then u *MAY* have to mod the Vdd. I changed mine to 1.85v and, with better cooling on the nb, was able to achieve 200 fsb easily as do most ppl with this mod. It's all in the dreaded code, "do you have a "C" stepping 1.1". If not u mght have to do what's in my sig.
Rig 1
Ep8RDA+ v1.1 (Vdd mod 1.85v) XP2500 AQZEA 0332 @ 2460MHz (205x12) Swiftech MCW462H Waterblock in Xaser II ally case
Ep8RDA+ v2.2 XP2500-M AQYHA 0410 @ 2640MHz, ATI 9800Pro, TwinMOS 3200 ram, LRWW Wb in GW-YCC6XF1 case.
Reply With Quote