View Single Post
  #4 (permalink)  
Old 12th January, 2004, 03:58 AM
SteveI's Avatar
SteveI SteveI is offline
AOA Staff
Join Date: September 2001
Location: NJ
Posts: 6,971

Your cooling is ok, so you should be good for a bit of an overclock. Keep in mind you are buying the fastest CPU available from the fab. You should be able to get 200-300mhz without too much problem. You will most likely have to bump the voltage a bit. Also, if you are unlucky you may get a locked CPU, and may be limited by other components on how high you can go.

EDIT: with the v7+, I do not recommend going over 1.85v.. How good is the memory you are getting?
AOA Team fah
Reply With Quote