Got some interesting results from my two XP2500+ mobiles, running on the RBX WB.
Mobile 1 and Mobile 2 both appear to be 5C cooler than my XP3200+ at the same voltages and loads, according to the diode reading, although the thermistor reading is about the same.
Mobile one tops out at 2.600 Ghz at 1.9 v, no matter what I do, it will not go any higher.
Mobile two tops out at 2.640 Ghz at 2.0 v. I believe it will go higher, but I'm not able to get rid of the heat with this RBX fast enough and the chip gets dangerously hot (approaching 60C according to the diode). When I get my direct-die block back on, I'll take a new set of measurements. |