Quote:
|
Originally Posted by timbob2469 paul8811, First off, Welcome to the AOA forum. Have you been plugging this USB device directly into the USB sockets at the back of the motherboard? There are issues using USB 2.0 devices if you use a third party socket that is connected to the pinouts on the motherboard, especially if it is an unshielded cable with 8 loose connectors on the end. The other issue I've seen mentioned is a USB device that won't work correctly unless you use a powered hub, not enough voltage is supplied to run them.
Bob |
Thanks for the reply....I have tried the device in both ftont & rear ports & the HD comes with an external power supply. As mentioned it just freezes now when I insert the cable