View Single Post
  #32 (permalink)  
Old 21st May, 2004, 11:02 PM
whatever's Avatar
whatever whatever is offline
Member
 
Join Date: January 2002
Location: moon
Posts: 1,132

Quote:
Originally Posted by JMa2969
I know the circuit devil, it is called DFI. Sorry if it offends the DFI lovers out there but I have gone through 1 Lanparty Ultra B and four(4) NFII Ultra Infinities and had problems with all boards from bios issues to not booting half the time. While I do admit that the DFI boards OC better than my AN7 (I can only hit 220 FSB with this AN7 but hit 440 with the Ultra Infinity) the issues with the boards weren't worth the extra bandwidth.
I'm talking about circuit devil from "outside" the computer systems, running around in his house and chasing after all of his computers. Wherever he goes in the house, the ghost follows him and get inside the motherboard and prevent from running 8X AGP, or 4X AGP in his other boards(not DFI board). He has stated that he cannot use AGP 4X in his OTHER board(not DFI) with his GF3 card as well. LOL

I was referring to the circuit devil, not the "board" itself. DFI boards do not have issue running 8X AGP interface. I haven't heard people having this problems in the other forums I go to. As for the booting issue, BIOS version 4-29 or newer has fixed many of their DFI Infinity/LP b boards. Still, not "All", but many of their boards have been fixed by it.

Tip: If you say you don't want to offend people, then don't say it to begin with. It works better that way.

Besides.. you "suppose" to have problem with the booting with DFI boards. it is not normal if it boots on you steadily. Randomly not booting is normal... I would be laughing if the DFI boards always boot. I have no problem with it, so is some other overclockers.

I wrote an article about this board for the Aoaforum site over 2 months ago. I explained about the problems and what this board is good for. These boards aren't made for the "general publics", those who don't overclock hard, those who don't bench to the limit. This board is suitable for the extreme overclockers and benchers. You shouldn't even have bought this board 5 times in a roll. Maybe you got this info too late, but I am telling you now. Now you know it that this board doesn't fit you.
__________________
sig
HTPC
Conroe E6600 + stock cooler @ 3.2ghz
ATi X1950XTX 512 CrossFire
Triple WD Raptor 10k HDDs@ raid 0
50" Panasonic Plasma TH50PHD7UY
50" Panasonic Plasma TH50PH9UK
BetterCable SilverSerpent SVGA & DVI-D
Sony BWU-100A Blu-Ray PC Drive

p4 - superPi - 31 sec.
pM - superPi - 28 sec.
conroe - superPi - 14 sec.

Last edited by whatever : 22nd May, 2004 at 12:24 AM.
Reply With Quote