View Single Post
  #19 (permalink)  
Old 15th June, 2004, 06:47 PM
danrok's Avatar
danrok danrok is offline
AOA Staff
 
Join Date: March 2003
Location: Great Britain
Posts: 18,917

Yes, always 1:1.

I prefer to set the memory timings manually, just to be sure.

You can use a tool like CPU-Z to see what the memory timings are being set to by AUTO.

BY SPD usually works fine. This will read the correct timings from a table which is stored on the memory module itself.

For now, I would just set the ratio to 1:1 and increase the FSB to say 170Mhz only, see what happens.

Avoid making too many changes in one go, otherwise things can get confusing.
__________________
Desktop PC: AMD FX-8370E / Asus M5A99X Evo R2.0 Motherboard / 16GB DDR3 RAM / GeForce GTX 970
AOA Team fah
Reply With Quote