View Single Post
  #20 (permalink)  
Old 4th July, 2004, 12:23 PM
Aedan Aedan is offline
Chief Systems Administrator
Join Date: September 2001
Location: Europe
Posts: 13,075

Originally Posted by CandymanCan
so the voltage goin up and down during load and idle is normal. This sucks because if want to get 2.6ghz i need 1.7v but on load it does 1.8v and thats way to high.

Is thier anyway to get te fan to spin faster on the stock HSF cuss 2900-3000Rpm is slow...
It *might* be possible to cut the tracks (or lift pins, depending on the voltage regulator) leading to the VID pins, and force them (with resistors) to a particular setting, so that the voltage is fixed. However, this is a lot of work to do.

As far as the fan goes, if you want a faster fan, then you'll probably have to replace the stock fan.
Any views, thoughts and opinions are entirely my own. They don't necessarily represent those of my employer (BlackBerry).
Reply With Quote