| Just did the vdimm mod, how far is to far ?
Ok i just did a scary solder job using a fat tiped soldering iron man it was hard, and it kinda tore the Trace off the board, but it works still thank god. Before idid the vdimm mod i set the vdimm voltage to 2.5v in the bios, now i have 2.84 when i booted up.
I set it to 2.6v in the bios i now have 2.94v, So how far is to far for the cpu? My memory can handle 3.3v fine prob more. But im worried about going to far for the cpu.
__________________
SYSTEM 1
Cpu : A64 3000+ Desktop Newcastle CBASC "CG Rev" Watercooled 285x9 2565mhz 1.7v 4xHTT
MotherBoard : Epox EP-8KDA3J Rev 1.0
Memory : Adata HyperRam pc4200 1x512mb 1:1 285mhz 3-4-4-8-1t
Video Card : PNY 6800GT
HDD : Maxtor Ata 133 7200 40gb
PSU : Antec TruePower 550w |