View Single Post
  #5 (permalink)  
Old 4th August, 2004, 03:44 PM
_MID_Viking's Avatar
_MID_Viking _MID_Viking is offline
Join Date: January 2004
Location: denmark
Posts: 220
Send a message via MSN to _MID_Viking

Originally Posted by Allan
Changing AGP voltage will not help, as it won't affect the core voltage. Leaving it on auto is probably not a bad idea.

How did you mount the sensor? Does it touch the cooler? And is the entire core touching the cooler?
i drill 2 hole in the hs that match on the videocard then i tok 2 pen and used the spring and found some plastick rims its all mouted so the hs is pussing on the core by the springs

the temp probe is mouted same way as aerogate shows in how to mount temp probe on cpu and no its not touching the hs

btw i had to cut a litle corner of the hs to make it fit
amd 2500 mobil @ 10.5 x 232 1.95v idle temp 39c load temp 47c
DFI lanparty ultra rev b
slk 947u 80mm Tt ultra @3600rpm *max 4600 rpm*
antec trueblue 480w
2x512 mb OCZ 3500 CpC on 11 2 3 2.0
ati 9800 pro 120gb seagate 8 mb buffer

system ordered 1 week agow
DFI SLI D 3500+Venice 2x512mb OCZ 4000 VX GOLD
HIS X850 XT PE OCZ 520w PowerStream
2x250gb Maxtor Diamond 10 2x NEC3520
Reply With Quote