| @gizmo
now im world champion in disassebling and assembling my mobo ;-( ive tried the hint you gave me and powered the MAX6657 with the 5VSBfrom the attp1 got GND from the attp1 also and lifted pin7. SMBCLK and SMBDATA to the SMBus, but on power on i got the siren. so take GND from the SMBus (clearing all possibilities) same result, checked the MAX6657 circuit after this with another sensor, works fine, so theres no problem with the circuit itself. After 4 or 5 times dis/reassembling i decided to do your mod, coz i didnt have anymore fun to dis/reassemble. So i done your mod. Pressing power on ... nothing happens ... urgh ... no siren nothing no fan is running only the red led is burning. removed the mod checked again, mobo runs fine. Today ive bought another nf7-s (new) and tried your mod there. Same procedure... on Power on nothing happens. No siren, nothing but the red led. Ive checked the soldering 10 times, measured up between pins 102,101; 97,98,99; and same with 61,60,62 .. checked with a magnifying glas, no shorts , nothing ... dont know whats going on here ....
staying shorly in front of a mental hangover ... think ive must drink a lot of beer if i dont find out why this dont work at my 2 nf7-s ....
If u have some suggestions , pls told me ...
Regards,
IronStone,
__________________
|