View Single Post
  #10 (permalink)  
Old 10th January, 2005, 07:48 AM
cadaveca cadaveca is offline
Member/Contributor/Resident Crystal Ball
 
Join Date: March 2004
Posts: 7,451

look at this..taken from thier site:
Quote:
We use ATIs respectively NVIDIAs standard power plugs. Asus is unfortunately not following ATIs/NVIDIAs solutions and therefore our plug doesn't fit. You can either cut both plugs and connect the wires correspondingly or you can also get 12 Volt power directly from the PSU. There you have to connect the wires as follows: black with black and red (VGA) with yellow (PSU). The yellow cable from the VGA is an RPM signal, that is not needed.
Attached Thumbnails
Artic Vga Silencer Rev. 3-fan_rotation.gif  
__________________
Reply With Quote