View Single Post
  #3 (permalink)  
Old 23rd January, 2005, 07:55 PM
Ads1 Ads1 is offline
Join Date: December 2004
Posts: 40

Notice that these LEDs are about twice the size of the keyboard ones so i shall not use the black washer that was in between the previous LED and circuit board. use solder to attach the new LEDs taking care to note which way round they go. there were diagrams on my keyboard showing which way round it goes. (+ve to the left.) After all three have been soldered on the keyboard is ready to put back together. remember to screw the circuit board back on and then all that needs to be done is to get the keys back in the right alignment. plug the kayboard back in and you'll be left with a nice keyboard!
Attached Thumbnails
Mod Your Keyboard-led-comparison.jpg   Mod Your Keyboard-leds-soldered-on.jpg   Mod Your Keyboard-finished.jpg  
Gigabyte GA-K8NE SKT754 Nforce4 PCI-E
AMD 64 2800+
Leadtek WinFast PX6800GT-TDH256
1 Gig RAM
Reply With Quote