| @ MietMaN
thanks for replying so quickly. answering your questions:
- yes, all are Everest's read test results.
- write-test with multi 9,5 and 11 I can do tonight - with the September stock-bios. using Merlin's bios again I'll wait for the hopefully fixed standby.
- yes: 2 x 512 MB MDT DS dualchannel (put in the sockets of the same color). yes: using the non-modded bios.
- "with CPC On?" Sorry, where is the switch? In "Advanced Chipset Features" I have "Memory Auto Precharge" 'enable'. "CPU Interface" I have 'optimal'. I found no difference to 'aggressiv'. So where is "CPC On"? - yes, next time I will try out 'Merlin's CPC On thingy'. (I heard that this is only for expensive memory, therefore I first tried the CPC Off version.)
Yeah the nice thing about this nForce boards is the possibility to adapt the fsb automatically. In daily life I switch with speedfan between fsb 133 and 233 (idle / load). multi 9.5, Vcore 1.47 v. 80 mm-cpu fan: 1200 rpm; 3 x 80 mm case fans, 2 @ 1050 rpm, one @ 1200 rpm. cpu-temp: 36° and almost no noise. beautiful!
The only pitty about the 8RDA6+ Pro is the fact that the board is not supporting the automatic fan speed control by speedfan.
__________________
|