Quote:
|
Originally Posted by mrapples ill try some more volts, but i doubt that its the proc, its a 2600 with an iqyha stepping, and i honestly have never seen them do this poorly
btw, the 12v rails on my psu is 22A |
Your OS doesn't do anything out of the ordinary when you try a stable setting? Indeed 22A for the 12v rail should really do the trick. I'd say check your memory modules, try with one and try asynchronous (lower of course). If it's still the same deal you may indeed be out of luck with your cpu.
Runnel, i find this very strange. I'll test it out right now.
btw, are you quoting the doors, my friend?
edit:
I normally run at 12x12.5 @ 2.5-3-3-11, now i changed the multiplier to 9.5, I had to do that in the bios, changing multipliers on the fly makes my system hang and resets my bios o_O. Here are my results:
12x
3297 int
3028 float
9.5x
3247 int
2990 float
I'd say those are rather normal results when you lower your multiplier.
Of course i have the cpc1 bios.
What happens when you try single channel and/or one stick of memory? What you're experiencing is not normal. Perhaps someone with a cpc2 bios could test the same?