[Wolf2000me]

Originally Posted by MietmaN

Interesting, isn't it?

@ Wolf2000me : have a look at those tests above. You're running the Merlin's bios now, so I see it is well optimized for many multis - 9.5x and 11x are almost identical. Good to know - I'm gonna tell Merlin - he should be happy with this fact.
This is what all the modders has been trying to achieve - similar bandwidth for a wide selection of multis. Usually, the bandwidth dropps while lowering multis, but I see that Epox has prepared something special for us

Interesting to say the least
I didn't know of all this until now. Thanks MietmaN
If there's anything you want me to test, i'll gladly make some time for you

Originally Posted by mrapples

nah, im in linux and it runs just fine at my stable settings

also, i only have one stick of 512

what if my psu wasnt stable enough, could that cause this?

Yes, it could cause it. It's even the most likely cause. If you're running a lot of hardware, like HDs and new graphics cards you can check it. Try to run with as little hardware plugged in as possible and check if your OC does slightly better. If that's the case then you know the cause. But from my experience i expect your cpu not to be of high quality. Of course if you have a different psu you could test with that as well but it likely won't be a better one or you'd be using that of course

edit: I'm going to look for some winbond UTT or BH-5 memory and buy me a booster. It'll likely be on Twinmos speedpremium memory in the near future. So perhaps no hassle with P/N numbers and stuff like that