Mjello again... I've run into another problem with my overclocking efforts. First the hardware:
xp-m 2400
8rda3+ with latest official bios
2x512 mb ballistix ram pc3200
9800 pro
80 gb hitachi harddrive
10 gb ibm harddrive
DVD reader
CD-r 32x burner
Topcom pci 154 (super G) wireless lan card
To the mobo theres 3 fans connected via 3 pin wires...
Antec trueblue 480 watt
psu
Voltage settings (bios setting/mbm reported): Vcore(1,75/1,72), Vdimm/+3.3(2,9/2,87), Vdd(1,8/1,79), +5.00 (4,92), +12,00 (11,73 - 11,80 Never seen it higher than 11,80 even at stock sooo), -12.00 (-6,63), -5.00 (-1,32)
Everything except onboard audio is turned off in bios (onboard lans and IO)
Now my problem is that I can hit 215 fsb and even 220 fsb with no errors in either memtest or prime.
BUT when I go to 220 fsb from 215 I loose all connection on my wireless card. I had it show connection very briefly at startup but then it was lost and never came back.
Restarting with 215 fsb and not even touching the antennae gave me good reception again.
Any suggestions on why this happens and how it can be solved?
Hugy thx in advance...
PS: My own initial thought was that there simply wasnt enough power to drive the card. :S