Hi!
Again, I tried modded BIOS. The voltages were again red, ok I ignored that. I boot into windows, with no problems. But the modded bios is not completely compatible with my mobo. LAN settings have collapsed, my MAC address changed, and stuff. The menus are different as with stock bios (some settings in on board devices...). well ok, i ignored that and just procede with testing, again, as i changed fsb for a few mhz, the computer reseted. I'm a bit confused right now. my cousin told me that he has 300W
PSU nad succesfully overclocked it at 220 FSB stable. is there any modded bios for 8RDA3+ PRO version. i know that this board is almost the same, if not identical in almost all things with 8RDA6+.
----------edited later----------------
ok, finally i flashed bios with this version 8RDA6+_PRO_TaiPan_0.1_E4_ED_Bpl_3.19_17.01.05.rar
the menus are the same, as in stock bios, no more LAN problems (of course, becouse it is 6+ pro version, which is the same as 3+ pro) and no more red V values in boot screen. ok. now i have tried to overclock. it's the same situation as before. as soon as i raise the FSB, blue screen appear. hm, so maybe is the
PSU the problem here?
more specific list of my computer:
Epox 8rda3+ PRO
Athlon 2500+ XP-M + Zalman 7000
1x 256mb Apacer PC4000
Radeon 9000 64 MB AGP
LAN card PCI
1x FDD
2x IDE hard disks
1x NEC 2510 DVD-RW
Rhoebus fan controler (powered by molex)
usb front panel (powered by molex)
PSU 300W
any suggestions?
THANX
Miha