I hate this new board. I have now tried 2 ver1.2 boards!
It has cost me 4 days of work now and i still have nothing.
I blew the first board bios on day 2 with a change in FSB that went nowhere and just hanged. As a result the board never worked again
So i put the second board in. The second board has a new latest ver. bios and it has another problem! The board will not restart after you shut it down.
It comes on but you have no display. The only wau to get the board to come back on is to switch it off at the
psu. Then it will come back on.
If you do a restart of windows all works fine...
Thirdly I can also not make out how to make a Nv Nvidia RAID setup from using a sinlge preformatted hdd that is already running windows on that pc and just adding a second empty drive to build a RAID1 setup.
I Tried to use the 3114 Raid chip and it would HANG every time you set it up to build the raid 1 setup and ask it to
copy the disk during the raid setup in the bios!!!
LIKE I SAID HATE.
I am giving all these epox boards back and going to a 939 setup if I can't resolve this ASAP!