to blueanot:
here's a pic of settings tab in 8.8 version. If your settings in the main window are proven to work via hard bios changes ~ {so you know the fsb and core V work under windows loads},
try pulling the
Vcore and fsb changes timeframe all the way down to 50 and 20 ~ {that's the bottom}.
your driver should be just as depicted in the jpeg i uploaded. Also, before you apply the main window settings, you might want to move stop grant to 1 ~ {this will pull about 5-7Cs off your
cpu temp} and your VDD down to 1.60.
Chances are (and I'm not there, so I can't comment succinctly) that your
ram settings aren't up to the jump you've been taking on the transition...
or the
cpu just can't go what you're asking of it. Which is it?