Quote:
|
Originally Posted by GrahamGarside Does the PSU have the 12V P4 connector? if so then that PSU is more than up to the task and then some.
The ram won't prevent you overclocking, as it's easy enough to limit the memory speed while still increasing the bus speed, don't know how much the memory it self will overclock, but if it's DDR400 CL2 then it can probably handle a decent overclock with some extra voltage
You will probably need a floppy for the sata drivers, unless you have a slipstreamed install disk with the latest service packs and drivers |
As far as the powersupply connector, I dont remember, i'll have to check, I just figured i'd ask
As it relates to overclocking....so am I to understand I can still possibly get a nice overclock with my setup, but if I was to use some
ram that can hit higher speeds I would be able to run it at a higher frequency and gain speed via a larger memory bandwidth?