View Single Post
  #2 (permalink)  
Old 29th September, 2005, 12:39 AM
Rocketman6800 Rocketman6800 is offline
Join Date: April 2005
Posts: 94

It is normal to get that message when you install a new CPU. Even if you just remove and place back your CPU you will still get this message. You should press F2 and then save your BIOS settings. Better would be to select "Load optimized Default" and then save & exit the BIOS.

If you have done this already then try resetting your CMOS (motherboard jumper). Maybe it will clear this problem.

I don't know about your voltage problem. Hopefully the above suggestion will help too.

Good luck!
DFI Lanparty NF4 Ultra-D @ 312 HT
Opteron 165 @ 2.8 Ghz (~1.33v)
2 X 1Gb Patriot PC3200 (2,3,2,5 1T)
2 X 300 GB Maxtor SATA (RAID 0)
700W OCZ Gametream PS
X-Fi XtremeMusic
Reply With Quote