View Single Post
  #4 (permalink)  
Old 30th September, 2005, 07:48 AM
MONKEYMAN's Avatar
MONKEYMAN MONKEYMAN is offline
Member
 
Join Date: January 2005
Location: DORSET, UK
Posts: 2,170

on a skt754 board your HTT/LDT total frequency should be 1600htt, so if your htt is 300mhz then set it to 2 so that (300x2=600)x2=1200 this is the highest you could set as a multiplier of 3 would make (300x3=900)x2=1800(too high), move your ram divider so that the resulting frequency is within the spc of your ram, for example if you have ddr400 ram and your htt is 250mhz then set it to 333/400 so your ram will be at around 400mhz.

By the way your system is video card limited rather than cpu limited, the 5900 cards will more than likely not max out an a64 cpu
__________________
AM2 X2 4000
2GB DDR2
NVIDIA 6150 ONBOARD!

Join our F@H team today.. http://www.team45.info/
Are you a subscriber? No? well then, why not....
Subscribe to AOA for a better experience and faster downloads!
How to unlock and overclock your Nvidia 6800
BIOS Volt-mod your 7800gt

AOA Team fah
Reply With Quote