View Single Post
  #9 (permalink)  
Old 20th October, 2005, 04:21 PM
Per Hansson Per Hansson is offline
Join Date: October 2003
Posts: 89

Called Seagate and they told me to put a jumper on the far right of the 4-pin jumper block when the harddrive is seen from the back with the power connector to the left, it did not help thugh...

Guess I will have to get an add-in card to get this to work...

The harddrive was recognized just fine by my Epox 8RDA3+ mobo's built-in Sil3112 SATA controller...
Reply With Quote