View Single Post
  #4 (permalink)  
Old 11th February, 2002, 03:56 PM
Big Sando Big Sando is offline
Member
 
Join Date: February 2002
Location: Just West of the Windy City
Posts: 2

When you say "2 pin mod", are you referring to the mod that I posted the link for?

If the answer to my question is "yes", then my reply is that it does work. Instead of using a resistor, I used an adjustable pot. With that I can take V I/O past 3.6V (default ~ 3.3V). It is not a complictaed mod. However, you must take your time as the points you are soldering are small. I am not an experienced electronics person by any degree. I am just someone who takes their time and thinks about things before tackling them. The instructions are included in the link, and they are very easy to follow.

__________________
AMD T-Bird 1200/266@1416(9.5x149)
Epox 8K7A w/ Vcore = 2.06V
ATI Radeon 32MB DDR @198/198
256MB Crucial @ 2.8V
Vantec CCK-6035D HSF
Maxtor 20GB 5400 RPM ATA100
MBM Temps load / idle = 45C / 38C
Enermax 430W PSU (w/R82 5V Mod)
Windows 98
Reply With Quote