View Single Post
  #1 (permalink)  
Old 15th January, 2006, 06:10 PM
djXternal djXternal is offline
Member
 
Join Date: April 2005
Location: Wesley Chapel, FL
Posts: 315
Send a message via AIM to djXternal Send a message via MSN to djXternal Send a message via Yahoo to djXternal

8rgm3i and vcore

Hey guys i have an 8rgm3i which has no options in the bios for vcore adjustment, so to lower the temps some I used the pin mod to try and bring the vcore down to 1.475, this actually just held the vcore down to about 1.5v... without the pinmod the vcore runs at 1.55v (this is what its at currently since I got arctic silver), but the pinmod to raise the voltage to 1.6v did not do anything, is there anything I can do to raise the voltage on this board at all?

I use an athlon xp-m 2500+
__________________
AOA Team fah
Reply With Quote