View Single Post
  #2 (permalink)  
Old 10th April, 2006, 04:19 PM
JimF's Avatar
JimF JimF is offline
Member
 
Join Date: August 2005
Location: South London/UK
Posts: 221

The Samsung Spinpoint manual has the following:

'In some rare cases SATA 1.5Gb/s hosts can not establish SATA interface connection with SATA 3.0Gb/s devices due to interface protocol
issues. In this case the jumper may be installed as shown on the figure below to force the device to negotiate for SATA 1.5Gb/s speed.'

I have an NF4 board so I can't say for certain that these will work but at least the manufacturer says they ought to !
__________________
Reply With Quote