| 1. in XP (laptop) make sure your ethernet is using DHCP
2. to connect to router it states in the manual to use 10.1.1.1
You can check this after you get a connection by the following
enter command prompt, enter 'ipconfig' and the output for Default gateway will be the address.
You should then be able to configure it via the browser - make sure you allow javascript. I have also found D-Link are a bit funny if you don't use IE or Firefox.
In the Fujitsu, what OS are you running? Basically W2k is the same as XP for this. What you may have to do is make sure it has SP4 but its best to have all the updates. You will most likely have to do a release/renew on the IP - just make sure you have dhcp set in network connections. Sorry pre W2k can't really help you, and as for Me, don't bother.
It looks like you can biff the old USB modem, as this has the ability to utilise your phone jack - just make sure that the ADSL ver you have is supported by the dlink
__________________ 
Silverstone ST405, AMD64 3500+ Winchester, Gigabyte GA-K8NXP-SLi,
4x512MB Generic, Palit 8600GT Super, 120GB WD SATA, 2x 320GB Seagate, Asus LightScribe DVDRW |