Hey guys.
So I read the sticky from Monkeyman and tried all those steps,and still no joy.
Im assuming the mb has got to be fried then.I cannot see any blown caps or resistors on the board.The only last solution is to somehow test my cpu and ram in another mb,i tested my graphic card in my NF4 mb,so its not that.The board was seriously undervolting of late,but I assumed it was the mb,not the
psu.The
psu,a CM Igreen 600watt,is only a few months old,and still powers on the pc.I stripped it to the bare minimum,took it out of the tower and then tried it like that with just ram,cpu,cpu cooler and vga,it only spins up with no post.Any ideas?