| Thanks guys.
So now I got my cpu at 3.2 gigs,with Vcore at 1.33,not sure if thats to high.
Cpu fsb is at 400,ram at ddr800,both set with 1:1 divider.
Kingston recommends 2.0 v for memory at 4-4-4-12 at ddr800,but when I set the voltage to that,it goes yellow,so im a bit concerned,should I rather run under 2.0v,will this cause any damage to my ram,if it undervolts,or just cause an unstable overclock.
Cpu temps are at 31 idle and about 45-48 under load with fan on high.
__________________
|