Thread: Fuzzy Monitor
View Single Post
  #12 (permalink)  
Old 19th June, 2008, 03:31 PM
MUff1N's Avatar
MUff1N MUff1N is offline
Member
 
Join Date: October 2007
Location: Payson/AZ
Posts: 889

Arrow

There's one other thing that I did that I didn't mention that maybe I should have before I installed the 177.35 drivers.
It's just that I do this everytime without thinking about it now!

After I un-installed the 175.16 drivers (Or any graphics driver before updating to a new one) I used Driver Cleaner Platinum to remove the leftover Nvidia files left behind in the Windows Driver cab...
This is to make sure it doesn't cause any problems with the installation of the new drivers...As I said I just do this without thinking about it now...
Driver Cleaner: drivercleaner.net

As far as the installation saying it can't find some dll files I'm not sure about that as I got no errors of any kind during my installation of the 177.35 XP drivers.
Attached Thumbnails
fuzzy-monitor-dcp.jpg  
__________________
Intel Core 2 Duo E6700 @ 3.30GHz / Zalman CNPS9700
Intel D975XBX2 Bad Axe 2 / FSB 1320
4GBs-2x Corsair XMS2 TWIN2X2048-6400C4 (4-4-4-12) @ 825Mhz
Seagate Barracuda SATAII 2 x 320GB
EVGA NVIDIA GeForce 8800 GTS 320mb/320bit (648/1512/2052) 82.2Gbs using EVGA Precision 1.3.3
PhysX Enabled: Geforce v180.48 drivers / 3DMark06 12162
Acer X222W HD 22" LCD 1000:1 / 5ms
Thermaltake ToughPower 750w / 85% efficiency / SLI-Crossfire ready
XP PRO SP3 / Vista Ultimate SP1 (Both tweaked)

Last edited by MUff1N : 19th June, 2008 at 06:03 PM.
Reply With Quote