Board arrived but had some things for Mareen that needed to get done so I didn't get to it for a while.
Put the board up on the prs-install bench and installed
CPU and
HSF. I through bolt that useing nylon washers.
One stick G.Skil 1Gb PC2-6400 and hook up the
PSU. I turn it on and
CPU fan runs but slow and then kicks it up. No Bios beep. I go about checking connections. Clearing
CMOS, and doing different mem configurations. I've pulled th
CPU to see if pins might be bent.Nothing.
CPU Is a bit contaminared w/ something!
Can I gently wash the
CPU in Alcohol or something