View Single Post
  #25 (permalink)  
Old 3rd February, 2009, 11:41 AM
PorPorMe's Avatar
PorPorMe PorPorMe is offline
Join Date: January 2008
Location: Othello, Wa
Posts: 3,207

Originally Posted by robbie View Post
Looks like you are missing some 5 1/4 drive bay covers.
I didn't think any one would spot it because of this cheep camera but with the guess going to drive bays, I have to show mercy.

The panel has been off for quite a while and I could mount it the way I wanted so I mounted it 180 degree's out so it would blow onto MCP & GPU.
I reversed it and that putt the fan on the bottom moving 1 1/4in from the top of he HS fins to the bottom! OOPS!
That could have been bad-relay bad. I've found it's difficult to work with material that has been cut out!
But I can remove some of the material just below the fan, and should be OK.
If I'm getting you correctly-you are in reference to the top front. There I've taken 3 bays and installed a 120mm Blue fan for exist. Layered blue wire holds cheese cloth. I still have three 5 1/2in bays to work with.
There is also the other HOD enclosure I could hang-4 more! of what? There is a BLK DVD Burner-a blk memery card reader/righter, and below that is a Blk fan enclosure for a 90mm.
Attached Thumbnails
boomans design mod-repair01.jpg  
AOA Team fah

1ST * Asus M5A99FX Pro r 2.0 *AMD FX 8350 Black Edition *Cooler Master MasterLiquid 240 CPU Cooler * Crucial 16g DDR3 * MSI Geforce GTX 1050 * Antec 650w* Thermaltake V9 Case
2nd Asus M5A99fx Pro R2.0 Mainboard *AMD FX 4300 Black edition * l6g Crutial DDR3 * Evga Geforce Gt 730 * Coolermaster Dual fan HSF * 500w Thermaltake PSU * 320g western digital HDD

Last edited by PorPorMe; 3rd February, 2009 at 11:47 AM.
Reply With Quote