Thread: VOLCANO 6Cu+
View Single Post
  #10 (permalink)  
Old 15th October, 2001, 12:35 PM
sonny's Avatar
sonny sonny is offline
Member
 
Join Date: October 2001
Location: Really Hot Place on Earth
Posts: 77

Quote:
Originally posted by eobard


Without the volt mod my 5v line fluctuates from between 4.901v at it's highest to 4.857v at it's lowest and the system is 100% stable. With the volt mod my 5v line fluctuated from 4.859v at it's highest to 4.791v at it's lowest. When the 5v line drops low enough the system either stalls until the 5v comes back up or it crashes. I need to figure out how to up the 5v line by about .2v or buy a new ps.
I posted a PSU voltmod in General Hardware that I found at another Forum. It's for an Enermax but should work for most PSUs.
__________________
¤ABIT KT7A-RAID 3S BIOS
¤1.1GHz 200FSB AXHA-9 1.75V @ 1.434GHz 286FSB 10 X 143 1.93V
¤28°C idle & 44°C load DOrb3 + PC70 w/ 6 X 80mm & 120mm(131CFM)
¤GF2MX 230core/205mem
¤431W Enermax PSU
¤2 X 20Gig Barracuda III RAID0
¤WXP Pro
Reply With Quote