Thread: 8k3a+ & o/c'ing
View Single Post
  #5 (permalink)  
Old 8th August, 2002, 09:22 PM
Pinky Pinky is offline
Banned
 
Join Date: September 2001
Posts: 5,957

You really have to mess up to "fry" your cpu just from unlocking it improperly. I used the highspeedpc.com kit and it was a breeze. It also contains a silicon type material to fill the pits and conductive grease, neither of which ever dries, both can be easily removed if one were ever to need to RMA

The worse you can do by crossing L1s is to not boot or only boot at default multiplier. Wipe it away and try again. If you get ink on the L3s, then you could have issues, but they should be covered with tape the whole time you're performing the unlock, so that never becomes an issue.
__________________
Reply With Quote