View Single Post
  #3 (permalink)  
Old 27th August, 2002, 01:31 AM
SadisticWarrior's Avatar
SadisticWarrior SadisticWarrior is offline
Member
 
Join Date: June 2002
Location: USA Fl. & Sober since 4-15-98
Posts: 467

Quote:
Originally posted by Orbit
Two ways:

One way (I use successfully): Set both the Master (main drive) and the Second drive (slave) to C/S (Cable Select) via the jumpers on the drives themselves. Then, the Main drive will be on the terminating end of the IDE cable. The placement of the drives on the cable with cable/select determines which is which.

Two: Set the Main drive's jumpers to Master and the Slave drive's jumpers to Slave and place them with the Main drive on the terminating end of the IDE cable and the Slave drive on the middle outlet.

Then, boot to BIOS and make sure the BIOS sees both drives as what they are. Just 'poke' around the BIOS a bit, you'll probably see how to do that. If not, just ask, or check on Google for BIOS configuration info for your bios.
I think I should have made myself more clear on what he dos'ent believe. I already set everything up like you said and transfered everything from the old HDD to the new(now the Master) HDD. Now he wants to dump all the info from the slave( old HDD) and use it only to install and play games from.
__________________
My Rig, Antec 1040 being Modded,MSI K7N2 Delta2, XP-3200 Barton,Volcano 11 w/SmartFan, 3x512mb PC-3200, 9600 XT,
Creative Labs Inspire 5.1 (5300),Win XP Pro w/sp2

2nd Rig, MSI K7N2 Delta 2, XP-3200 Barton, Global Win CK-38 w/60mm Delta, 9600XT, XP Pro

99% of all computer problems are sitting in front of the monitor But.... so is the Solution!
Reply With Quote