View Single Post
  #6 (permalink)  
Old 31st August, 2002, 06:14 PM
SteveI's Avatar
SteveI SteveI is offline
AOA Staff
Join Date: September 2001
Location: NJ
Posts: 6,971

From your other thread, you mentioned that it was working until you messed with the vid drivers, and changed some settings in the BIOS... I realize you said you already discharged the CMOS... However, did you unplug the power or turn off the switch at the back of the PSU first? If you move jumpers, without disengaging power completely, the cmos memory will not clear. I'm hoping it's not a HW issue and just a simple bios setting causing your problems.
AOA Team fah
Reply With Quote