AOA AOA AOA Folding For Team 45 AOA Files Home Front Page Become an AOA Subscriber! UserCP Calendar Memberlist FAQ Search Forum Home


Go Back   AOA > Hardware > AMD Motherboards & CPUs
Reload this Page AMD TbredB 2400+
Register FAQ Members List Calendar Arcade Search Today's Posts Mark Forums Read

AMD Motherboards & CPUs Questions or comments on AMD products?


Reply
 
LinkBack Thread Tools Rate Thread
  #1 (permalink)  
Old 15th March, 2003, 12:12 PM
SpleeNMaN's Avatar
Member
  
Join Date: March 2003
Location: Hilversum, Holland
Posts: 72

Question AMD TbredB 2400+
hello guys!
someone has offered me to trade his 2400+ TbredB w/ my 2000+ TbredA and 10 Euro's.
what clockspeed will 2400+ TbredB do on avarage (w/ appropriate cooling of course)
PS the code is:
AXDA2400KV3C
AIUHB 0249
__________________
Silentmaxx Fanless Pro 503W PSU. EPoX 9NPA+ Ultra. AMD Athlon64 3200+ Venice E6. Twinmos 512 DDR x 2 (dual channel) PC3200. Hitachi Deskstar 7200rpm, 8MB Sata II x 2 @ raid0, Cpu, Gpu, Chipset watercooled by Innovatek (and a Ford Taunus engine radiator)
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 15th March, 2003, 01:35 PM
SteveI's Avatar
AOA Staff
  
Join Date: September 2001
Location: NJ
Posts: 6,944

Sounds like one of the older B's. If you are unlucky, you might not even top 2100mhz. They seemed to do 2100-2200, usually.
__________________
AOA Team fah
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 24th March, 2003, 01:30 AM
Member
  
Join Date: March 2003
Posts: 46

AIUHB 0249 << I think this is the 49 week of 2002 so it would have been at the end of the year. (I think)

@ Steve do you have more info on the best stepping for a 2400 as far as OCing is concerned?

THanks
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 24th March, 2003, 02:03 AM
Goofy's Avatar
Member
  
Join Date: March 2003
Location: Stockholm, Sweden
Posts: 2

Quote:
Originally posted by SteveI
Sounds like one of the older B's.
It's an AIUHB, they are not the oldest B steping!! Thats probebly a good cpu!
__________________
You really must excuse my bad english!
rig: XP2100+ @ 2388mhz (217x11) | Epox 8rda+ | Twinmos pc3200 w/winbond | Gf4 ti4200 128mb @ 320/620 | IBM deskstar 120gb | 15227 points in 3dmark 2001se
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 25th March, 2003, 07:00 PM
Liquid3D's Avatar
Member
  
Join Date: December 2002
Location: Newport, RI SURF
Posts: 374

I think those are the ones doing 2.5, 2.6Ghz.
__________________
(1.) 2.4C@3.6GHz 300FSB, SLK900U/Vantec Tornado 92mm/119CFM, Abit IS7-E, 1GB OCZ GolD Dual Channel 3700, Tyan G9700 Pro, PCPower&Cooling 400W
(2.) JIUHB1700, Prometeia, Soltek 75FRN2-L, 1GB OCZ EL-PC3700, Leadtek Winfast A250, ANTEC 480W
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old 25th March, 2003, 07:03 PM
SpleeNMaN's Avatar
Member
  
Join Date: March 2003
Location: Hilversum, Holland
Posts: 72

u'r right! it does 2580
__________________
Silentmaxx Fanless Pro 503W PSU. EPoX 9NPA+ Ultra. AMD Athlon64 3200+ Venice E6. Twinmos 512 DDR x 2 (dual channel) PC3200. Hitachi Deskstar 7200rpm, 8MB Sata II x 2 @ raid0, Cpu, Gpu, Chipset watercooled by Innovatek (and a Ford Taunus engine radiator)
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old 25th March, 2003, 07:41 PM
Member
  
Join Date: March 2003
Posts: 46

...
2580 @ what temps and how stable i.e. how long have u run it at that speed... btw are you using SB cooling if so what kind... mod of an old HS or a Zalman?

:beer:
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old 27th March, 2003, 08:42 AM
Liquid3D's Avatar
Member
  
Join Date: December 2002
Location: Newport, RI SURF
Posts: 374

With that cooling system, you may be able to run the chip at those speeds indefinately. I'll bet your only pushing 1.95V, and your load temp's are 40C?
__________________
(1.) 2.4C@3.6GHz 300FSB, SLK900U/Vantec Tornado 92mm/119CFM, Abit IS7-E, 1GB OCZ GolD Dual Channel 3700, Tyan G9700 Pro, PCPower&Cooling 400W
(2.) JIUHB1700, Prometeia, Soltek 75FRN2-L, 1GB OCZ EL-PC3700, Leadtek Winfast A250, ANTEC 480W
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old 27th March, 2003, 08:48 AM
SpleeNMaN's Avatar
Member
  
Join Date: March 2003
Location: Hilversum, Holland
Posts: 72

2,050 Vcore, innovatek watercooling + 30CM Ferm LV-300T fan on left side of case
(unloaded) MB 21C CPU 36C
(loaded) MB 23C CPU 39C

...(homemade) prometia soon to come...
__________________
Silentmaxx Fanless Pro 503W PSU. EPoX 9NPA+ Ultra. AMD Athlon64 3200+ Venice E6. Twinmos 512 DDR x 2 (dual channel) PC3200. Hitachi Deskstar 7200rpm, 8MB Sata II x 2 @ raid0, Cpu, Gpu, Chipset watercooled by Innovatek (and a Ford Taunus engine radiator)
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old 27th March, 2003, 06:45 PM
Member
  
Join Date: March 2003
Posts: 46

...
cool - I am looking forward to read some reviews on the new Corsair H2o system which is suppposed to be MSRP $200
__________________
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #11 (permalink)  
Old 28th March, 2003, 10:30 AM
Liquid3D's Avatar
Member
  
Join Date: December 2002
Location: Newport, RI SURF
Posts: 374

I was pretty darn close. :nervous: Homeade Prommie? How'd choo do dat mangee?
__________________
(1.) 2.4C@3.6GHz 300FSB, SLK900U/Vantec Tornado 92mm/119CFM, Abit IS7-E, 1GB OCZ GolD Dual Channel 3700, Tyan G9700 Pro, PCPower&Cooling 400W
(2.) JIUHB1700, Prometeia, Soltek 75FRN2-L, 1GB OCZ EL-PC3700, Leadtek Winfast A250, ANTEC 480W
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

« Thinking of upgrading | How far can i push it :P »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
$115 Xp 2400 runs at 2400 good deal? The Spyder AMD Motherboards & CPUs 6 25th February, 2003 08:31 AM
What is a safe VCore for TBredB Millyons AMD Motherboards & CPUs 6 20th February, 2003 03:57 AM
8RDA+ 2100+ tbredB Kingmax DDR400 = NO 200FSB k_prost EPoX MotherBoards 4 10th February, 2003 08:20 PM
does the 8K7A+ support 2100+ TbredB?? Stang_Man EPoX MotherBoards 4 26th January, 2003 09:11 AM
How hot is too hot? AMD 2400? audimaniac AMD Motherboards & CPUs 45 1st November, 2002 11:33 PM


All times are GMT -6. The time now is 09:09 AM.

Contact Us - Forum Home Page - Top

Copyright ©2001 - 2007, AOA Forums

Search Engine Friendly URLs by vBSEO 3.2.0