AOA Forums AOA Forums AOA Forums Folding For Team 45 AOA Files Home Front Page Become an AOA Subscriber! UserCP Calendar Memberlist FAQ Search Forum Home


Go Back   AOA Forums > Hardware > AMD Motherboards & CPUs

AMD Motherboards & CPUs Questions or comments on AMD products?


Reply
 
LinkBack Thread Tools Rate Thread
  #1 (permalink)  
Old 1st May, 2003, 09:48 PM
Member
 
Join Date: October 2002
Location: Wales,UK
Posts: 141
Send a message via ICQ to Shonk Send a message via AIM to Shonk Send a message via Yahoo to Shonk

Barton is this oc ok?

got my 2500+ yesterday


AXDA2500DKV4D 9375757240717 AQUCA0310WPAW

it overclocks as follows

1.65 volts 2200mhz
1.75 volts 2266mhz
1.85 volts 2300mhz

pass prime95 memtest 3dmark etc

is this considered a good clocking barton or just average?
__________________
CPU: AMD Athlon XP 2600+ OC'd 219x11.5 1.72V
Alpha Pal8045 2700 Rpm Fan @ 1600 Rpm 2500Mhz
Motherboard: Abit AN7
RAM: OCZ Premier 512mb X 2
Primary: Ati Radeon 9800 Pro 128meg
Second: Geforce FX5200 PCI 128meg 128bit
Primary: AOC LM919 19" TFT 16ms
Second: AOC LM919 19" TFT 16ms
Third: Iiyama E430S 17" TFT 16ms
16x Nec 3500AG X 2
52x24x52x16 LG Combi X 2
2x 200Gig Diamond Max 9 Sata Raided
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #2 (permalink)  
Old 1st May, 2003, 09:53 PM
Member
 
Join Date: October 2002
Location: Wales,UK
Posts: 141
Send a message via ICQ to Shonk Send a message via AIM to Shonk Send a message via Yahoo to Shonk

Attached Thumbnails
Barton is this oc ok?-image1.gif  
__________________
CPU: AMD Athlon XP 2600+ OC'd 219x11.5 1.72V
Alpha Pal8045 2700 Rpm Fan @ 1600 Rpm 2500Mhz
Motherboard: Abit AN7
RAM: OCZ Premier 512mb X 2
Primary: Ati Radeon 9800 Pro 128meg
Second: Geforce FX5200 PCI 128meg 128bit
Primary: AOC LM919 19" TFT 16ms
Second: AOC LM919 19" TFT 16ms
Third: Iiyama E430S 17" TFT 16ms
16x Nec 3500AG X 2
52x24x52x16 LG Combi X 2
2x 200Gig Diamond Max 9 Sata Raided
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #3 (permalink)  
Old 1st May, 2003, 10:07 PM
Liquid3D's Avatar
Member
 
Join Date: December 2002
Location: Newport, RI SURF
Posts: 374

Looks like you have a real nice stepping there. If 1.85V got you 2.3GHz I wonder where 2.0V, and extreme cooling would take an BArton AQUCA 2500? Default is 1.83GHz or 1.86GHz?

EDIT: if your hitting 46C with an Alpha PAL, I doubt there's much more head-room, unfortunately. Look's like Barton's are 2300MHz overclockers until Phase-Change then they hit a ceiling of 2.5GHz. Not bad for a 1.8GHz CPU, but weve been spoiled with these dang 1700 JIUHB's!
__________________
(1.) 2.4C@3.6GHz 300FSB, SLK900U/Vantec Tornado 92mm/119CFM, Abit IS7-E, 1GB OCZ GolD Dual Channel 3700, Tyan G9700 Pro, PCPower&Cooling 400W
(2.) JIUHB1700, Prometeia, Soltek 75FRN2-L, 1GB OCZ EL-PC3700, Leadtek Winfast A250, ANTEC 480W


Last edited by Liquid3D; 1st May, 2003 at 10:11 PM.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #4 (permalink)  
Old 1st May, 2003, 10:42 PM
Member
 
Join Date: October 2002
Location: Wales,UK
Posts: 141
Send a message via ICQ to Shonk Send a message via AIM to Shonk Send a message via Yahoo to Shonk

ive only got a slow 80mm fan mind i dont want no delta screamer
__________________
CPU: AMD Athlon XP 2600+ OC'd 219x11.5 1.72V
Alpha Pal8045 2700 Rpm Fan @ 1600 Rpm 2500Mhz
Motherboard: Abit AN7
RAM: OCZ Premier 512mb X 2
Primary: Ati Radeon 9800 Pro 128meg
Second: Geforce FX5200 PCI 128meg 128bit
Primary: AOC LM919 19" TFT 16ms
Second: AOC LM919 19" TFT 16ms
Third: Iiyama E430S 17" TFT 16ms
16x Nec 3500AG X 2
52x24x52x16 LG Combi X 2
2x 200Gig Diamond Max 9 Sata Raided
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #5 (permalink)  
Old 1st May, 2003, 11:12 PM
Liquid3D's Avatar
Member
 
Join Date: December 2002
Location: Newport, RI SURF
Posts: 374

Really? And your getting 46C at 1.85V? Umm, maybe their's more head-room, then I thought. Have you thought of taking her higher? Now I'm sort of confused, becasue I just ordered a JIUHB:0307 AXDA1700DUT3C, for $60, $70 shipped 3-day from West Coast,  but my original thought was to go Barton 2500 for $132, shipped 3-day $142?       &nb sp;       &nbsp ;        & nbsp;       &nb sp;       &nbsp ;        & nbsp;   
__________________
(1.) 2.4C@3.6GHz 300FSB, SLK900U/Vantec Tornado 92mm/119CFM, Abit IS7-E, 1GB OCZ GolD Dual Channel 3700, Tyan G9700 Pro, PCPower&Cooling 400W
(2.) JIUHB1700, Prometeia, Soltek 75FRN2-L, 1GB OCZ EL-PC3700, Leadtek Winfast A250, ANTEC 480W

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #6 (permalink)  
Old 1st May, 2003, 11:17 PM
Member
 
Join Date: October 2002
Location: Wales,UK
Posts: 141
Send a message via ICQ to Shonk Send a message via AIM to Shonk Send a message via Yahoo to Shonk

not realy 1.85 volts is the most i will take a 0.13 chip on air

i prefer 1.75 realy
__________________
CPU: AMD Athlon XP 2600+ OC'd 219x11.5 1.72V
Alpha Pal8045 2700 Rpm Fan @ 1600 Rpm 2500Mhz
Motherboard: Abit AN7
RAM: OCZ Premier 512mb X 2
Primary: Ati Radeon 9800 Pro 128meg
Second: Geforce FX5200 PCI 128meg 128bit
Primary: AOC LM919 19" TFT 16ms
Second: AOC LM919 19" TFT 16ms
Third: Iiyama E430S 17" TFT 16ms
16x Nec 3500AG X 2
52x24x52x16 LG Combi X 2
2x 200Gig Diamond Max 9 Sata Raided
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #7 (permalink)  
Old 1st May, 2003, 11:18 PM
Member
 
Join Date: October 2002
Location: Wales,UK
Posts: 141
Send a message via ICQ to Shonk Send a message via AIM to Shonk Send a message via Yahoo to Shonk

it would most prob do 2400 at 1.95 with a slk800 and a delta though

its windows stable at 1.775 volts btw at 2300
just not prime 95

and burn k7 stable at 1.8 volts
__________________
CPU: AMD Athlon XP 2600+ OC'd 219x11.5 1.72V
Alpha Pal8045 2700 Rpm Fan @ 1600 Rpm 2500Mhz
Motherboard: Abit AN7
RAM: OCZ Premier 512mb X 2
Primary: Ati Radeon 9800 Pro 128meg
Second: Geforce FX5200 PCI 128meg 128bit
Primary: AOC LM919 19" TFT 16ms
Second: AOC LM919 19" TFT 16ms
Third: Iiyama E430S 17" TFT 16ms
16x Nec 3500AG X 2
52x24x52x16 LG Combi X 2
2x 200Gig Diamond Max 9 Sata Raided
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #8 (permalink)  
Old 2nd May, 2003, 12:11 AM
Member
 
Join Date: October 2002
Posts: 6

I got a XP2500 a few days ago... AQUCA 0310 MPM. It did 2559 on 1.95 Vcore, watercooling on CPU and NB. Don't know how much Vcore they can take?

SuperPi and CPU-Z
__________________
Abit NF7-S | XP2500+ | Water Cooled CPU + NB + GPU | 2*256 Mb Corsair Twinx | 2 X Barracuda 40 Gb RAID 0
Radeon 9800 Pro | Turtle Beach Santa Cruz | 3DMark 2001SE=21074
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #9 (permalink)  
Old 2nd May, 2003, 03:49 AM
Liquid3D's Avatar
Member
 
Join Date: December 2002
Location: Newport, RI SURF
Posts: 374

To the best of my knowledge 2.2V if it's cold enough? Above that I don't know what the effects would be? Interesting question though. As heat is primary reason CPU's fail, then as long as the heat is dissipated, in theory, there'd be no limit, but we know that be true. For example even if your CPU, was at -50C,and you pumped 4V into it it would fry the circuits, would it not? I need Aedan's wisdom.
__________________
(1.) 2.4C@3.6GHz 300FSB, SLK900U/Vantec Tornado 92mm/119CFM, Abit IS7-E, 1GB OCZ GolD Dual Channel 3700, Tyan G9700 Pro, PCPower&Cooling 400W
(2.) JIUHB1700, Prometeia, Soltek 75FRN2-L, 1GB OCZ EL-PC3700, Leadtek Winfast A250, ANTEC 480W

Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #10 (permalink)  
Old 3rd May, 2003, 07:55 AM
SiGmA_X's Avatar
Member
 
Join Date: April 2002
Location: Portland, OR
Posts: 1,529
Send a message via ICQ to SiGmA_X Send a message via AIM to SiGmA_X Send a message via MSN to SiGmA_X Send a message via Yahoo to SiGmA_X

One of my friends just ordered a sweet rig.. XP2500/Barton, nForce2, Radeon9500Pro (He has a GeForce4Ti4600, which should he use?), 2x256MB PC3500 RAM, 2xWD1200JB's, RAID-card Should be hella nice and hella fast
__________________
"In war, it is not the goal to die for your country, but rather to make the other bastard die for his!"
AOA Team fah
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #11 (permalink)  
Old 4th May, 2003, 01:29 AM
Holst's Avatar
Member
 
Join Date: September 2001
Location: Leics UK
Posts: 4,528

my barton responds badly to vcore.

Anything much more than 1.9v is counter productive.

Temperature is more inportant to my chip.

at 1.9v I can run 2.5gig

if I go to 2.2v I can get 2.65gig stable but only if I keep the chip very cold.
__________________
No longer Epox Tech.

Best of luck in the future all my friends.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #12 (permalink)  
Old 4th May, 2003, 05:41 AM
Liquid3D's Avatar
Member
 
Join Date: December 2002
Location: Newport, RI SURF
Posts: 374

WOW 2.6GHz! You must be using phase-change?

I'd tell your friend building his system to run the Radeon 9500, I'm almost positive it'll not only surpass the GF4 Ti in benchmark's, but the visual qualities (most important in my view) are incredible in this ATI series. And with the BIOS upgrades, and sftware mods available, he'll be able to acheive 9700 performance levels (at least in theory). Actually I've always preferred ATI visually to nVidia's graphics. Although their nForce2 motherboard's AGP/Twinbank architecure did wonders for my Tyan Tachyon G9700 Pro. When I transferred the card from my KT400 based 8K9A to my 8RDA I not only picked up an immediate 3,000 3DMark2001SE points, but the visual quality improved as well! 
__________________
(1.) 2.4C@3.6GHz 300FSB, SLK900U/Vantec Tornado 92mm/119CFM, Abit IS7-E, 1GB OCZ GolD Dual Channel 3700, Tyan G9700 Pro, PCPower&Cooling 400W
(2.) JIUHB1700, Prometeia, Soltek 75FRN2-L, 1GB OCZ EL-PC3700, Leadtek Winfast A250, ANTEC 480W


Last edited by Liquid3D; 4th May, 2003 at 07:13 AM.
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
  #13 (permalink)  
Old 4th May, 2003, 06:47 AM
Uncle Bob's Avatar
Member
 
Join Date: April 2002
Location: Blaine, WA
Posts: 3,734

Quote:
Originally posted by Holst
my barton responds badly to vcore.

Anything much more than 1.9v is counter productive.

Temperature is more inportant to my chip.

at 1.9v I can run 2.5gig

if I go to 2.2v I can get 2.65gig stable but only if I keep the chip very cold.
That's sweet! How is it cooled and what board is it on?
__________________
Main Rig: Gigabyte GA-965P-DQ6 (rev. 1.0) cooled by the Monster Water Cooling Setup
HTPC One BIG Case Asus 8 CORE Monster
Current PC Count:
ASROCK: 1 * BIOSTAR: 1 * ASUS: 5 * CHAINTECH: 7 * GIGABYTE: 2 *IWILL: 1 * MSI: 3* TYAN: 2
175+ GHZ total power for PC Perspective Killer Frogs Climate Prediction Team as The Uncle B's!!
and more coming all the time!

I'm the Uncle your Aunt won't talk about. Go ahead and pull my finger!
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
a64 vs barton _MID_Viking AMD Motherboards & CPUs 10 6th May, 2004 12:00 AM
Barton 2600+ Barton steppings Pieros AMD Motherboards & CPUs 8 4th November, 2003 10:35 PM
Barton and DDR 400 Neoprene AMD Motherboards & CPUs 8 8th June, 2003 01:45 PM
barton sly113 ThunderRd's AOA FOLDING@HOME Team 31 23rd May, 2003 10:36 PM
Barton? graftonater AMD Motherboards & CPUs 5 17th February, 2003 02:57 AM


All times are GMT +1. The time now is 07:55 PM.


Copyright ©2001 - 2010, AOA Forums
Don't Click Here Don't Click Here Either

Search Engine Friendly URLs by vBSEO 3.3.0